News

September 14, 2020

4Terrain Heavy Duty delivers an increase in torque capacity through the patented ER2 heavy duty cover assembly. This system features an increased clamp load of on average 20% higher than OE. The system also gains torque capacity from the Spheroidal Graphite Iron (SG Iron) ER2 grooved pressure plate. This groove has been specifically designed to increase the Mean Effective Radius of the pressure plate and assist in heat removal. The increase in the Mean Effective Radius of the cover assembly gives a significant increase in torque capacity. Paired with a 25% thicker clutch disc 4Terrain HD outperforms and out lasts the competitors.

September 14, 2020

CI Heavy Duty (HD) clutch system is a tough, no-nonsense clutch upgrade. Engineered to handle loads of torque, it leaves standard specification clutches behind. The HD clutch is built to endure the rugged demands of workhorse vehicles. A logical choice for those who demand relentless reliability. The HD clutch system is ideal for vehicles involved in activities that subject standard clutches to higher than usual loads. It is equally comfortable navigating congested city streets.

September 14, 2020

Got a stock vehicle and use it for just normal daily driving? A standard replacement clutch kit is the product for you. CI Clutch Designed and manufactured to replace the clutch system installed as Original Equipment, reliable is the term which best describes the CI standard replacement kits. This range provides a Quality Assured replacement […]

September 14, 2020

When a new clutch kit is installed the flywheel must be either replaced or machined. This is because excessive heat from normal driving changes the structure of your flywheel surface which creates less friction affecting the performance of your clutch. By replacing or machining your flywheel the surface of the flywheel reinstated back to the original equipment friction characteristic.

August 23, 2020

A fully hydraulic system sees the actuation of the clutch completely taken by the hydraulics through the Concentric Slave Cylinder (CSC).

August 23, 2020

Most clutch release systems have either a semi-hydraulic or a fully hydraulic system. Originally a cable was used from the pedal to the clutch fork however as modern engine compartments are narrowing this method is no longer used. The clutch cable from the pedal to the clutch fork is replaced by a hydraulic line, master cylinder and slave cylinder. In this configuration the clutch fork is actuated by the slave cylinder.

August 16, 2020

Dry Double Clutches are serviceable and do wear. Replacing a DCT does require some speciality tools to remove and refit the replacement clutch and this can be dependent on the specific DCT system.

August 16, 2020

DCT consists of two sub-transmissions located in one transmission housing. Each sub-transmission is designed like a manual transmission with its clutch assigned to it. Depending on the engine’s torque and space, the clutches can be either a wet for high torque applications or dry design which is more economical.